SurfaPaint ThermoDry Interior combines a superior quality interior paint with the thermal insulating materials contributing to energy savings during winter and summer. Available in white for optimum reflective properties. It can be used as a tinting base for light shades.

How It Works

SurfaPaint ThermoDry delivers all the benefits of a high quality paint: Scrub resistance, excellent coverage, anti-fungal action, strong adhesion and coating flexibility. The application of SurfaPaint ThermoDry Interior can prevent thermal bridges on walls, a frequent occurrence of poorly insulated surfaces. It is an ideal solution for preventing mould growth by eliminating humidity condensation on cold wall surfaces, along with its anti-fungal properties. Finally, it reduces internal heat losses increasing the energy efficiency of buildings. It can be used as a tinting base for light shades. SurfaPaint ThermoDry Interior is a cool colour, certified by the European Cool Roofs Council (ECRC)

Applications

Walls
Ceilings
Concrete
Plaster
Kitchens
Bathrooms
Children's rooms
School Buildings
Hospitals
Hotels
Public areas

Benefits

Thermal Insulation
Conserves energy
High scrub resistance
High washability
Protects against mould growth
Anti fungal action
Prevents thermal bridges
Low V.O.C.
Water based paint
Easy application on surface
Excellent coverage and opacity

How to Apply - Surface Application

Applicability: SurfaPaint ThermoDry Interior can be applied directly on interior wall surfaces (masonry, concrete, plaster, drywalls), and wherever water based, acrylic paints are applied. New substrates from cement or masonry should have cured for more than 3-4 weeks before primer application. For better results apply SurfaMix P as a primer.

Preparation: Ensure all surfaces are clean and dry prior to application. Remove any dust and dirt.

Application note: Stir well before application. Do not dilute for bridging gaps and hairline cracks of up to 0,5 mm. For cracks bigger that 1mm, fill the gap with a suitable putty. If thinning is required add up to 10% water by volume. Application temperature should be between 8 - 35oC. Apply 2-3 even coats using a good quality brush, roller or by spraying with a tip of a diameter 1,4mm or more. Do not over-brush. Ensure corners and edges are adequately covered. Additional coats should be applied 4-6 hours after the previous application.

Drying time: Typically 1 hour depending upon coat thickness. Low temperatures and high humidity will lengthen drying times.

Coverage

Spreading Rate: 10-12 m²/L.

Collection: ThermoDry Paint

Filter and sort

Filter

SurfaPaint ThermoDry Interior Paint

SurfaPaint ThermoDry Interior Paint